Touch Panel CT Controller
Category: Led Dimmer  Publish Time: 2014-05-27 15:06 

Touch Panel CT Controller
This Touch panel Color-temperature controller is a new high-end controller newly designed by our factory. The glass panel design, makes the appearance more beautiful and fashionable. It adopts high precision capacitance touch control chip, increases the touch sensitivity, and can reduces trigger which caused by mistake. It is used for controlling a variety of lamp whose source of light is LED. For instance, point source of light,flexible light strip, wall washer lamp, glass curtain wall light etc., it has many advantages such as convenient to connect, easy to use ,etc. It can realize cold,white warm white,pure white light Color-temperature and other effects of lighting change.

Technical parameters:

 

  • working temperature: -20-60 °C 
  • supply voltage: DC12-24
  • output: 2 channels
  • connection mode: common anode
  • external dimension: L86 Χ W86Χ H36mm
  • packing size: L115 Χ W110 Χ H56 mm
  • net weight: 130g
  • gross weight: 187g
  • static power consumption: <1W
  • output current: <4A( each channel )
  • output power: 12V<96W,24V<192W

External dimension:

 

 

 

Interface Specifications:

 

 

 

Direction for use:

  

 

2,When touch the button and the ring ,the indictor light will be flash each time.

3,standard change is shown in the below table:

 

Mode No.

Function

Remark

1

warm white

 

2

warm white +20% Cold White

 

3

warm white +40% Cold White

 

4

warm white +60% Cold White

 

5

warm white +80% Cold White

 

6

White

 

7

Cold White +80% warm white

 

8

Cold White +60% warm white

 

9

Cold White +40% warm white

 

10

Cold White +20% warm white

 

11

Cold White

 

 

 

 

 

Typical Applications:

 

 

 

 

Installation Method:

 

1.gently pry gaps in touch panel with a screwdriver, and then you can slowly remove the panel, as shown below;

 

 

 

 

 

2.remove the cable. Pull the locking of the terminal transposon, and then you can slowly remove the cable, 

as shown below:

 

 

 

 

3.Fix the base of controller in the 86×86 installation box (customers need to buy the installation box by 

themselves) on the wall with screws.

 

4.use your hand gently push up the cable seat lock according to step 2, plug the cable into cable seat, 

press the lock, and mount the cable of panel on the base, as shown below: 

 

 

 

 

 

5.installation is completed, as shown below:

Prev product：No prev product
Next product：11 keys Single color led dimmer