
Technical Parameters:
Working temperature |
-20-60°C |
Supply voltage |
DC5V, 12V,24V optional (specify the required voltage on orders) |
0utput |
3 channels |
Connecting mode |
common anode/cathode optional (specify the required voltage on orders) |
External dimension |
L61*W35*H22 mm |
Romote Controller |
L136ΧW48ΧH59mm |
Net weight |
60g |
Gross weight |
85g |
Static power consumption |
<1W |
Output current |
<2A(each channel) |
Output power |
5V:<30W, 12V:<72W, 24V:<144W |
Products Dimiension:
Interface Specification:
Power input interface :
Infrared receiver interface:
Load output interface:
Typical Application:
Direction for use :
1.Connect the load wire at first, following by the power wire; Please ensure short circuit,can not occur between connecting wire before you turn on the power;
2.Operation: you will receive infrared remote control in front of infrared receiver to ensure that there is no barrier between the remote controller and receiver.
The key-press functions are shown in the table as below (in accordance with the key position order):
Supplement: About DIY key, when it’s pressed first time, will enter the DIY color mode, you can adjust the color buy press the 6 keys at above to increase or decrease the R/G/B color by yourself freely(if other key is pressed this time,will jump out from DIY color mode). And you can save the color which you have adjusted by pressing the DIY key once again. When next time this key is pressed, it will show the color you saved last time.
Common Problem:
Cautions:
1. Supply voltage of this product is DC12V-24V, never connect to others or AC220V.
2. Before using the infrared remote, the insulating film should removed.
3. Lead wire should be connected correctly according to grade that connecting diagram offers.
4. This product is not to overload;
5. Warranty of this product is two year, but exclude the artificial situation of damaged or overload working.