
Technical Parameters:
Working temperature:-20-60°C
Input voltage:DC5-12V
Output:3 circuit
Connection mode:Common anode
controller size:L40.0×W12.0×H5mm
remote size:L125×W56×H7mm
Net weight:35g
Gross weight:45g
Static power consumption:<0.5W
Output current:<2A*3A(each circuit)
Output power: 5V:<30W, 12V:<72W
External dimension:
Direction for use:
1.Connect the load wire at first, following by the power wire; Please ensure short circuit can not occur
between connecting wire before you turn on the power;
2.Operation: you will receive infrared remote control in front of infrared receiver to ensure that there
is no barrier between the remote controller and receiver.
3.The key functions are as below:
Brightness + |
Brightness -l |
Pause/Run |
On/Off |
Static red |
Static green |
Static blue |
Static white |
Static orange |
Static light green |
Static dark blue |
Static milk white |
Static dark yellow |
Static cyan |
Static lyons blue |
Static white pink |
Static yellow |
Static light blue |
Static purple |
Static green-white |
Static light yellow |
Static sky blue |
Static brown |
Static blue white |
Increase red |
Increase green |
Increase blue |
Speed up |
Decrease red |
Decrease green |
Decrease blue |
Speed-down |
DIY key1 |
DIY key2 |
DIY key3 |
Automatic change |
DIY key4 |
DIY key5 |
DIY key6 |
Flash on and off |
3 color jump change |
7 color jump change |
3 color fade change |
7 color fade change |
Supplement:About DIY key, when it’s pressed first time, will enter the DIY color mode, you can adjust
the color per the 6 keys at above to increase or decrease the R/G/B color by yourself freely(if other key is
pressed this time,will jump out from DIY color mode). And you can save the color which you have adjusted by
pressing the DIY key once again. When next time this key is pressed, it will show the color you saved last time.
There are 6 DIY keys, so you can save 6 colors you like. They are all Independent, have no effect each
other. For example: if you press DIY key1 first, and then press DIY key2, DIY key1 will be invalid, until DIY key2
is pressed once again, current color will be saved.
Typical Applications: