
Technical Parameters:
External Dimension:
(Controller)
(Remote control)
(Packing size)
Interface Specifications:
Power input interface:
Adopt the Screw terminal
Load output interface:
Adopt the Screw terminal
Direction for use:
1.Connect the load wire at first, following by the power wire; Please ensure short circuit can not occur
between connecting wire before you turn on the power;
2.Adopt film button control and RF control, function of remote control is with the same of panel. There
are 8keys in total, function of each button as below::
Each press, the green light flash one time, indicating that has entered the next state.
Standard color changes as follows:
Items |
Patterns |
Remarks |
Items |
Patterns |
Remarks |
1 |
Static red |
Brightness is adjustable,Speed is unadjustable. |
14 |
Green stroboflash |
Speed and Brightness are adjustable |
2 |
Static green |
15 |
Blue stroboflash |
||
3 |
Static blue |
16 |
Yellow stroboflash |
||
4 |
Static yellow |
17 |
Purple stroboflash |
||
5 |
Static purple |
18 |
Cyan stroboflash |
||
6 |
Static cyan |
19 |
White stroboflash |
||
7 |
Static white |
20 |
R/B cross-fade |
Brightness is unadjustable,Speed is adjustable. |
|
8 |
Three-color jumpy changing |
Speed and Brightness are adjustable |
21 |
B/G cross-fade |
|
9 |
Seven-color jumpy changing |
22 |
G/R cross-fade |
||
10 |
Three-color gradual changing |
Brightness is unadjustable, Speed is adjustable. |
23 |
All fade out&fade in |
|
11 |
Seven-color gradual changing |
24 |
Random stroboflash |
Speed and Brightness are adjustable |
|
12 |
Three-color flowing |
Speed and Brightness are adjustable |
25 |
Automation |
1~24 |
13 |
Red stroboflash |
|
|
Typical Applications:
Common Problems:
Problems |
Possible cause |
Solution |
1.Lamp does not light after power |
Power cord is not properly connected, or there is not output switching power supply |
Connect the power cord properly or replay the power |
Lamp power cord is not connected or short circuit |
Connected lighting power cord |
|
2. After connecting some of the load the controller does not work |
The connected load is too large, so that it has burned in some of the components of the controller |
Replace parts of components or replace the controller |